Table of Contents
Advertisement
2.5
Expansion slot
2.5.1
Installing an expansion card to the riser card bracket
The barebone server comes with two riser card brackets allowing you to install PCI Express
x8 or x16 expansion cards.
Open the secure lock
Before removing the riser card bracket, follow the steps below to open the secure lock:
1.
Remove the screws on the secure lock of the riser card bracket using a screw driver (one
on each side).
2.
Push the right secure lock to the right and the left secure lock to the left to release the
riser card bracket.
3.
Lift and remove the riser card bracket.
2-14
1
2
3
4
1
2
3
4
Q-Code
Q-Code
Chapter 2: Hardware Setup
Advertisement
Table of Contents
