Viewing Sas Topology - Asus RS300-H8-PS12 User Manual

1u rackmount server
Hide thumbs Also See for RS300-H8-PS12:
Table of Contents

Advertisement

6.4.5

Viewing SAS topology

From the Adapter Properties screen, select SAS Topology, then press <Enter>.
1.
LSI Corp Config Utility
Adapter Properties -- SAS2308-2
Esc = Exit Menu
Enter = Select Item
2.
Information about the volume and its member-disks is displayed.
LSI Corp Config Utility
SAS Topology -- SAS2308-2
PIKE 2308(04:00)
﹂ Controller
﹂ RAID1 VOL
Esc = Exit
Alt+D = Device Properties
You may press <Alt>+<D> to display device properties, or <Alt>+<M> to display more
keys.
LSI Corp Config Utility
SAS Topology -- SAS2308-2
More keys for the SAS Topology display:
Alt+B = Select or deselect a device as the preferred boot device
Alt+A = Select or deselect a device as the alternate boot device
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off)
6-34
Adapter
PCI Slot
PCI Address(Bus/Dev)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
F1/Shift+1 = Help
-/+/Enter = Change Item
v7.29.00.00 (2012.11.12)
Device Identifier
Direct Attach Devices
LSI
F1/Shift+1 = Help
Alt+M = More Keys
v7.29.00.00 (2012.11.12)
v7.29.00.00 (2012.11.12)
PIKE 2308
07
04:00
5.00.00.00-IR
500E0180:1280E000
05.02
Enabled
0
[Enabled BIOS & OS]
Logical Volume
3000
Chapter 6: RAID configuration
Device
Info
Controller

Advertisement

Table of Contents
loading

Table of Contents