Table of Contents
Advertisement
Red Hat
Enterprise Linux OS 6.x
®
To install the LSI MegaRAID controller driver when installing Red Hat
1.
Boot the system from the Red Hat
3.
While booting from DVD, press <ESC> to provide the third party driver. Enter the following
command at the boot: Linux dd then press <ENTER>.
4.
Insert the Red Hat
Write-protect the floppy disk to avoid computer virus infection.
If the Red Hat
drive into an available USB port.
7-10
®
Enterprise RAID driver disk into the USB floppy disk drive.
®
Enterprise RAID driver is stored in a USB flash drive, insert the USB flash
®
OS installation CD.
Enterprise OS:
®
Chapter 7: Driver installation
Advertisement
Table of Contents
