Table of Contents
Advertisement
On the Adapter Properties screen, use the arrow keys to select RAID Properties,
4.
then press <Enter>.
LSI Corp Config Utility
Adapter Properties -- SAS2308-2
Esc = Exit Menu
Enter = Select Item
On the Select New Volume Type screen, use the arrow keys to select Create RAID 1
5.
Volume, then press <Enter>.
LSI Corp Config Utility
Select New Volume Type -- SAS2308-2
Esc = Exit Menu
Enter = Choose volume type to create
6-20
Adapter
PCI Slot
PCI Address(Bus/Dev)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
F1/Shift+1 = Help
-/+/Enter = Change Item
Create RAID 1 Volume
Create RAID 1E/10 Volume
Create RAID 0 Volume
F1/Shift+1 = Help
v7.29.00.00 (2012.11.12)
Asus SAS2308-2
07
04:00
5.00.00.00-IR
500E0180:1280E000
05.02
Enabled
0
[Enabled BIOS & OS]
v7.29.00.00 (2012.11.12)
Create a RAID 1 volume
consisting of 2 disks plus up to 2
optional hot spares. ALL DATA on
volume disks will be DELETED!
Create a RAID 1E or RAID 10 volume
consisting of 3 to 10 disks including
up
to 2 optional hot spares. ALL DATA on
volume disks will be DELETED!
Create a RAID 0 volume consisting of
2 to 10 disks. ALL DATA on
volume disks will be DELETED!
Chapter 6: RAID configuration
Advertisement
Table of Contents
