Table of Contents
Advertisement
7.
A warning screen appears. Press any key to continue.
Press <M> to keep existing data on the first disk. If you choose this option, data on
the first disk will be mirrored on the second disk that you will add to the volume later.
Ensure the data you want to mirror is on the first disk.
Press <D> to overwrite any data and create the new IM array.
LSI Corp Config Utility
Create New Volume -- SAS2308-2
WARNING! Data was found on the selected disk, this data will be lost
when the volume is created!
Choose Discard configuration or Cancel Exit on the next screen to abort.
Esc = Exit Menu
SPACE/+/- = Select disk for volume
8.
Repeat step 6 to add the second disk to the volume.
9.
When done adding the required disks, press <C> to create the volume then select
Save changes then exit this menu.
Create and save new volume?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
Exit the Configuration Utility and Reboot
10.
Wait for the utility to finish creating the volume.
LSI Corp Config Utility
Create New Volume -- SAS2308-2
Processing...may take up to 1 minute
Creating RAID Volume...
6-22
v7.29.00.00 (2012.11.12)
F1/Shift+1 = Help
C = Create array
v7.29.00.00 (2012.11.12)
Chapter 6: RAID configuration
Advertisement
Table of Contents
