Sata Configuration - Asus RS300-H8-PS12 User Manual

5.4.3 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
SATA Controller(s)
SATA Mode Selection
S.M.A.R.T. Status Check
Serial ATA Port 0
Software Preserve
Port 0
Hot Plug
SATA Device Type
Spin Up Device
Serial ATA Port 1
Software Preserve
Port 1
Hot Plug
SATA Device Type
Spin Up Device
Serial ATA Port 2
Software Preserve
Port 2
Hot Plug
SATA Device Type
Spin Up Device
SATA Controller(s) [Enabled]
This allows you to enable or disable the SATA Device. Configuration options: [Enabled]
[Disabled]
SATA Mode Selection [AHCI]
This allows you to choose how SATA controller(s) should operate. Configuration options:
[AHCI] [IDE] [RAID]
S.M.A.R.T. Status Check [Enabled]
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
ASUS RS300-H8-PS12
[Enabled]
[AHCI]
[Enabled]
HardDisk (250.0GB)
SUPPORTED
[Enabled]
[Enabled]
[Hard Disk Drive]
[Disabled]
HardDisk (250.0GB)
SUPPORTED
[Enabled]
[Enabled]
[Hard Disk Driver]
[Disabled]
HardDisk (250.0GB)
SUPPORTED
[Enabled]
[Enabled]
[Hard Disk Driver]
[Disabled]
Enable or disable SATA
Device.
5-15