Table of Contents
Advertisement
6.3
Intel
(Windows)
The Intel
Rapid Storage Technology enterprise allows you to create RAID 0, RAID 1, RAID
®
10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are connected to the
Serial ATA connectors supported by the Southbridge.
You need to manually install the Intel
Windows
To enter the Intel
system:
1.
Turn on the system and go to the windows desktop.
2.
Click the Intel
Your storage system is configured for data protection, increased performance and
optimal data storage capacity. You can create additional volumes to further optimize
your storage system.
You can click Rescan to re-scan any attached hard disks.
6-12
®
Rapid Storage Technology enterprise
operating system. Please refer to the installation instructions in Chapter 7.
®
®
Rapid Storage Technology enterprise utility under Windows operating
Rapid Storage Technology enterprise icon to display the main menu.
®
Rapid Storage Technology enterprise utility on a
®
Chapter 6: RAID Configuration
Advertisement
Table of Contents
