Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
To change the menu options:
(Menu) > Copy Feature on the control panel.
Sets the image size.
You can enter the number of copies using the number
Reduces or enlarges the size of a copied image (see
"Reduced or enlarged copy" on page 52).
Adjusts the brightness level to make a copy that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 51)
If the machine is set Eco mode, reduce and
enlarge features are not available.
Adjusts the contrast level to scan an original that is
easier to read, when the original contains too faint or
too dark contents (see "Contrast" on page 52)
Improves the copy quality by selecting the document
type for the current copy job (see "Original" on page 52)
Adjusts the layout format such as poster, clone, ID copy,
2/4-up, booklet, etc.
Reduces the size of the original images and prints 2 or 4
pages onto one sheet of paper.
2-up or 4-up
This copy feature is available only when you
load originals into the document feeder.
3. Useful Setting Menus