Stores the received fax in memory without printing out.
To print received documents, you need to enter the
password. You can prevent your received faxes from
being accessed by unauthorized people (see "Receiving
in secure receiving mode" on page 181).
Adds additional documents to a reserved delay fax job
(see "Adding documents to a reserved fax" on page
Cancels the delayed fax job which is saved in memory
(see "Canceling a reserved fax job" on page 177).
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
To change the menu options:
(Menu) > Fax Setup > Sending on the control panel.
Sets the number of redial attempts. If you enter 0, the
machine will not redial.
Sets the time interval before automatic redialling.
Sets a prefix of up to five digits. This number dials
before any automatic dial number is started. It is useful
for accessing a PABX exchange.
Sends faxes using error correction mode (ECM) to
makes sure the faxes are sent smoothly without any
error. It may take more time.
Sets the machine to print a report whether a fax
transmission was successfully completed or not. If you
select On-Error, the machine prints a report only when
a transmission is not successful.
Prints a transmission report with a minimized image of
the first page of the fax sent.
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
3. Useful Setting Menus