Mounting And Installation; Mounting Positions - Elation PLATINUM BEAM 15R Manual

7. MOUNTING AND INSTALLATION

Cautions:
For added protection mount the fixtures in areas outside walking paths, seating areas, or
in areas were the fixture might be reached by unauthorized personal.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 times the device's weight.
Fixture installation must always be secured with a secondary safety attachment, such as
an appropriate safety cable.
Never stand directly below the device when mounting, removing, or servicing the fixture.
Mounting
The Platinum Beam 15R™ is fully operational in two different mounting positions,
hanging upside-down from a ceiling, or set on a flat level surface (see illustration on next
page). Be sure this fixture is kept at least 0.5m away from any flammable materials
(decoration etc.). Always use and install the supplied safety cable as a safety measure to
prevent accidental damage and/or injury in the event the clamp fails.
Caution!
When install the fixture be sure there is no highly inflammable
material within a distance of 3.5 feet
Refer to regulations BGV C1 (formerly VBG 70) and DIN
VDE0711-217 for proper installation in Europe To ensure
proper installation, only qualified staff should attempt
installation.
Platinum Beam 15R™