Elation PLATINUM BEAM 15R Manual page 31

light in situations that require an extremely dark environment. This
amount of time the display will remain on until it is automatic
disabled as default.
Display Reverse – This function will allow the entire display to be flipped by 180˚ to allow for
better view when the fixture is hung from truss or a ceiling. This function is disabled as
default.
LOCK – This function allows you to lock the keys on the display to prevent menu tampering.
With this function you can activate the automatic key-lock function. If this
activated, the keys will be automatically locked in 15 seconds from the last command. In
order to deactivate or temporarily deactivate the key-lock function, press the Mode/Esc
Button for 3 seconds to regain access to the menu commands.
9.4.4 Temperature C/F – This function changes the temperature the unit will display from
either Celsius or Fahrenheit. Fahrenheit is set as the default measurement.
9.4.5 Initial effect – This function allows a user to create and assign a custom "Home
Position" into the fixture. Adjusting the Pan and Tilt values then locking those values into the
fixture's internal memory creates the new "Home" position.
9.4.6 Restore Default – This function is used to restore the factory settings of the device. All
settings will be set back to the default values (shaded). Any edited scenes will be lost.
9.5 Reset Functions: The reset function returns a motor to the "Home" position. There are several
reset functions available on this fixture. The list below details the functionality of each available
selection.
Ø
Reset All: This function will reset all internal motors to the home position.
Ø
Reset Pan and Tilt: This function will only reset the pan and tilt motors to the home
position.
Ø
Reset Colors: This function will only reset the color wheel to the home position.
Ø
Reset Gobos: This function will only reset the gobo wheels to the home position.
Ø
Reset Shutter: This function will only reset the blackout shutter to the home position.
Platinum Beam 15R™
function will adjust the
turned off. This function is
function is