Elation PLATINUM BEAM 15R Manual page 28

9.2.3. Software version
This function will display the current operating software version of the fixture.
• The LCD will read "V-X.X", "X.X" represents the version number, e.g. "V-1.0",
"V-2.6".
• Use the UP and DOWN buttons to toggle through the software version of
different IC's.
9.3 Lamp Control:
9.3.1 Lamp On or Off
This function allows manual control of the lamp power via the on-board system menu.
• Select "ON" if you wish to strike the lamp or "OFF" to switch it off.
• Press "ENTER" to confirm.
• Press the Mode/Esc-button to return to the main menu.
9.3.2 Automatic La-On
When in the "ON" position, this function will automatically turn the lamp on when power is
applied to the fixture
9.3.3 Lamp On Via DMX
When engaged, this function will allow the lamp to be switched "on" via a DMX controller.
Select "ON" to enable this function or "OFF" to disable it.
9.3.4 Lamp Off Via DMX
When engaged, this function will allow the lamp to be switched "off" via a DMX controller.
Select "ON" to enable this function or "OFF" to disable it.
9.3.5 Lamp On at Temp.
The fixture is designed to shut the lamp off when an excessive temperature is sensed inside
the head by the on-board CPU. The lamp is shut down to prevent damage to the lamp and
avoids possible internal damage to the head. This function sets the minimum temperature for
lamp restrike after the lamp has been automatically shut off.
9.3.6 Lamp Off at Temp.
The fixture is designed to shut the lamp off when an excessive temperature is sensed
inside the head by the on-board CPU. The lamp is shut down to prevent damage to the lamp
and avoids possible internal damage to the head. This function sets the maximum internal
operating temperature of the head before the lamp will automatically be shut down. This
function can be set to activate at an internal temperature between 80° C and 139° C. Inside
Platinum Beam 15R™