Cleaning And Maintenance - Elation PLATINUM BEAM 15R Manual

16. CLEANING AND MAINTENANCE

The following points have to be considered during the inspection:
1. Be sure all screws and fasteners are securely tightened at all times. Lose screws
may fall out during normal operation resulting in damage or injury as larger parts
could fall.
2. There must not be any deformations on the housing, color lenses, rigging
hardware and rigging points (ceiling, suspension, trussing). Deformations in the
housing could allow for UV radiation leakage. Damaged rigging points or
unsecured rigging could cause the unit to fall and serious injure a person.
3. All mechanical parts and motors should not show any traces of serious wear and
should rotate freely.
4. Electric power supply cables must not show any damage, material fatigue or
sediments. Never remove the ground prong from the power cable.
Further instructions depending on installation and usage have to be adhered by a skilled
installer and any safety problems should be addressed before attempting operation.
We recommend frequent cleaning of the fixture, this will ensure operational longevity and
crisp light output. When cleaning, please use a moist, lint-free cloth. Never use alcohol or
solvents.
There are no user serviceable parts inside this fixture with the exception of the lamp.
Please refer all other service related issues to an authorized Elation service technician.
Should you decide to service the fixture yourself please order genuine Elation parts
directly from Elation.
Platinum Beam 15R™