Elation PLATINUM BEAM 15R Manual page 35

7. Press MODE/ESC to return to the main menu.
Controller Settings:
1. Set the DMX value of channel 1 to a value of 7.
2. Set the DMX value of channel 2 to a value of 7 or 8. When channel 2 is
set to "7" you can adjust the starting address between 1 and 255.
When set to "8" you can adjust the starting address between 256 and
511.
3. Use channel 3 to set your desired DMX starting address. For example:
If you want to set the starting address to 57, set channel 1 to a value of
"7," set channel 2 to a value of "7" and use channel 3 to set your
address to 57 by selecting a channel value of 57. Example 2: If you
want to set the starting address to 420, set channel 1 to a value of "7,"
channel 2 to "8" and channel 3 to "164" (256+164=420).
4. Wait for approximately 20 seconds for the unit to complete the
address reset function.
Platinum Beam 15R™