Twisted-Pair Cable For Hub (Mdi-X) To Computer (Mdi) 10 Mbps Or 100 Mbps Network Connection - HP ProCurve 10 Installation Manual

Cables and Connectors
Twisted-Pair Cable/Connector Pin-Outs
Twisted-Pair Cable for Hub (MDI-X) to
Computer (MDI) 10 Mbps or 100 Mbps Network
Connection
To connect PCs or other MDI network devices to these ports, use a "straight-
through" cable.
N o t e
Pins 1 and 2 on connector "A" must be wired as a twisted pair to pins 1 and 2
on connector "B".
Pins 3 and 6 on connector "A" must be wired as a twisted pair to pins 3 and 6
on connector "B".
Pins 4, 5, 7, and 8 are not used in this application, although they may be wired
in the cable.
.
B-2
Connector "A"
Straight-Through Cable
White/Orange
Orange/White
Connector "B"
White/Green
Green/White