Installing The Hp 10/100 Hubs; Included Parts - HP ProCurve 10 Installation Manual

Installing the HP 10/100 Hubs

The HP 10/100 hubs are easy-to-install. Each comes with an accessory kit that
includes the brackets for mounting the hub in a standard 19-inch telco rack
or equipment cabinet, or on a wall, and also includes rubber feet that can be
attached to the hub so it can be securely located on a horizontal surface. The
brackets are designed to allow mounting the hubs in a variety of orientations.
This chapter shows you how to install your HP 10/100 hub.

Included Parts

The HP 10/100 hubs have the following components shipped with them:
HP ProCurve 10/100 Hubs Installation Guide (5967-9934), this manual
Connectivity Rules for 100T Networks (5967-2281)
HP ProCurve 10/100 Hub 12M and Hub 24M Management and Config-
uration Guide (5967-9933) -- for Hub 12M and Hub 24M only
HP TopTools for Hub & Switches - CD-ROM and booklet -- for Hub 12M
and Hub 24M only
Customer Support/Warranty booklet
Accessory kit (5064-2085):
• two mounting brackets
• four 8 mm M4 screws to attach the mounting brackets to the hub
• four 5/8-inch number 12-24 screws to attach the brackets to a rack
• four rubber feet
Console cable -- Hub 12M and Hub 24M only
Power cord, one of the following:
Australia/New Zealand
China
Continental Europe
Denmark
Japan
Switzerland
United Kingdom/Hong Kong/Singapore
United States/Canada/Mexico
8120-6803
8120-8377
8120-6802
8120-6806
8120-6804
8120-6807
8120-8709
8120-6805
2
2-1