Download Print this page

HP ProCurve 10 Installation Manual: Features

Switches and hubs.
Hide thumbs


Introducing the HP ProCurve 10/100 Hubs


The features of the HP ProCurve 10/100 hubs include:
12 or 24 Ethernet 10/100Base-T ports with RJ-45 connectors
plug-and-play networking—all ports are enabled—just connect the
network cables to active Ethernet or Fast Ethernet network devices and
your network is operational
all ports can autonegotiate the connection speed (10 or 100 Mbps) with
the connected device
a built-in bridge connects 10 Mbps and 100 Mbps devices automatically,
with nothing else to buy
per port LEDs showing link status and whether the port is operating at
100 Mbps or 10 Mbps
Activity and Collision LEDs showing general levels of network activity
and collisions on the hub
push-button MDI/MDI-X selection on Port 1 to allow a straight-through
cable to be used for cascading to another hub or switch
rack- or wall-mountable with mounting hardware included
additional management features such as per-port security, and hub control
through a full-featured hub console, through the built-in web browser
interface, and through HP TopTools for Hubs & Switches is available for
the Hub 12M and Hub 24M



This manual also for:

Procurve 100

Comments to this Manuals

Symbols: 0
Latest comments: