Download Print this page

HP ProCurve 10 Installation Manual: Where To Go From Here

Switches and hubs.
Hide thumbs


Installing the HP 10/100 Hubs

Where to Go From Here

Where to Go From Here
Your hub is now correctly installed and is able to send and receive data
between end nodes, servers, and printers.
The HP 10/100 hubs are plug-and-communicate network devices requiring no
configuration. The Hub 12M and Hub 24M are managed hubs. If you wish to
manage these hubs from an SNMP-based network management station, you
will need to configure the IP address on the hubs. See the HP ProCurve 10/
100 Hub 12M and Hub 24M Management and Configuration Guide that
came with your hub for information on how to use the hub console to
configure the IP address.
N o t e
The Hub 12M and Hub 24M can also be managed through a graphical interface
that you can access from any PC or workstation on the network by running
your web browser and typing in the hub's IP address as the URL. No additional
software installation is required to make this interface available; it is included
in the hub's onboard software.



This manual also for:

Procurve 100

Comments to this Manuals

Symbols: 0
Latest comments: