REMOVING THE OVEN TEMPERATuRE SENSOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug range or disconnect power.
2.
Open the oven door and remove oven racks
from the inside of oven.
Oven Sensor
3.
Remove two oven sensor screws.
Oven Sensor
Screws
4-10
4.
Pull the oven sensor forward so that
the wire connectors are inside the oven
cavity.
5.
Disconnect the plug from the oven sensor
harness.
NOTE: When you disconnect the plug, be careful
not to allow them to pull back behind the
access holes where you will not be able
to retrieve them without removing the unit
from its installation.
Oven Sensor
Plug