Configuring The Mx3X With Lxeconnect; Install Lxeconnect - LXE MX3X Reference Manual

Configuring the MX3X with LXEConnect

Configuring the MX3X with LXEConnect
LXEConnect allows a user to view the MX3Xscreen remotely from a PC using an ActiveSync connection:
Requirements: ActiveSync version 3.8 (or higher) must be resident on the host (desktop/laptop) computer. Please see the
following section ActiveSync for more details on ActiveSync.
ActiveSync is already installed on the MX3X. The MX3X is preconfigured to establish a USB ActiveSync connection to a PC
when the proper cable is attached to the MX3X and the PC. If The MX3X uses a serial port for ActiveSync, it is necessary to
configure the MX3X to use the serial port. Complete details on the proper cables and port configuration are included in the
ActiveSync section.

Install LXEConnect

1. Install Microsoft ActiveSync version 3.8 or higher on a PC with a USB port. For details, please see ActiveSync.
2. Power up the MX3X.
3. Connect the MX3X to the PC using the proper connection cable. Once connected, the ActiveSync dialog box appears.
If using the USB connection, the ActiveSync connection is automatically established. If using a serial connection, it is
necessary to initiate the connection from the MX3X.
4. Select "No" for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a partnership is not set up.
It is not necessary to establish a partnership to use LXEConnect. However, if a partnership is desired for other reasons,
one may be established now. More details on partnerships are included in ActiveSync later in this section.
5. When the ActiveSync screen appears, select Explore.
6. An explorer window is displayed for the MX3X. Browse to the \System\LXEConnect folder. If this folder is not present,
contact your LXE representative for the necessary files.
ActiveSync Explore
E-EQ-MX3XRG-W-ARC [ 49 ] MX3X Reference Guide