Configuring The Mx9 With Lxeconnect; Install Lxeconnect - LXE MX9 Reference Manual

Configuring the MX9 with LXEConnect

Configuring the MX9 with LXEConnect
LXEConnect allows a user to view the MX9screen remotely from a PC using an ActiveSync connection:
Requirements: ActiveSync version 3.8 (or higher) must be resident on the host (desktop/laptop) computer. Please see the
following section ActiveSync for more details on ActiveSync.
ActiveSync is already installed on the MX9. The MX9 is preconfigured to establish a USB ActiveSync connection to a PC
when the proper cable is attached to the MX9 and the PC. If The MX9 uses a serial port for ActiveSync, it is necessary to
configure the MX9 to use the serial port. Complete details on the proper cables and port configuration are included in the
ActiveSync section.

Install LXEConnect

1. Install Microsoft ActiveSync version 3.8 or higher on a PC with a USB port. For details, please see ActiveSync.
2. Power up the MX9.
3. Connect the MX9 to the PC using the proper connection cable. Once connected, the ActiveSync dialog box appears. If
using the USB connection, the ActiveSync connection is automatically established. If using a serial connection, it is
necessary to initiate the connection from the MX9.
4. Select "No" for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a partnership is not set up.
It is not necessary to establish a partnership to use LXEConnect. However, if a partnership is desired for other reasons,
one may be established now. More details on partnerships are included in ActiveSync later in this chapter.
5. When the ActiveSync screen appears, select Explore.
6. An explorer window is displayed for the MX9. Browse to the \System\LXEConnect folder. Contact your
resentative for the necessary files if this folder is not present.
ActiveSync Explore
E-EQ-MX9RG-C [ 47 ] MX9 Reference Guide
LXE rep-