Peap/Ms-Chap Authentication Configuration; Configuring The Peap/Ms-Chap Supplicant; Figure 5-33 Cisco Peap/Mschap Wireless Network Properties - LXE MX5X Reference Manual

Cisco Client Configuration

PEAP/MS-CHAP Authentication Configuration

The Microsoft supplicant authenticates a user with the PEAP/MS-CHAP protocol. The Cisco CAB
file without Cisco PEAP must be used with PEAP/MS-CHAP. See Installing Cisco Wireless
Client Drivers, earlier in this chapter, for more information.

Configuring the PEAP/MS-CHAP Supplicant

With the wireless parameters configured (see Wireless Network Configuration in this chapter) set
the EAP type to PEAP as shown above.
If the EAP type box text is not exactly as shown see Installing Cisco Wireless Client Drivers in
this chapter, to change the wireless client CAB file.
Tap the Properties button.
When first configuring and authenticating, do not validate the server certificate. This allows the
user authentication to be tested. When user authentication is successful, come back to this screen
and validate the server certificate.
E-EQ-MX5CERG-D

Figure 5-33 Cisco PEAP/MSCHAP Wireless Network Properties

Figure 5-34 Cisco Authentication Settings
191
MX5X Reference Guide