Attach Handstrap (Optional); Attach The Stylus Clip (Optional); Figure 1-6 Mx3X With Handstrap Installed - LXE MX3X Reference Manual

Getting Started

Attach Handstrap (Optional)

Once installed, the elastic handstrap provides a means for the user to secure the computer to their
hand. It is adjustable to fit practically any size hand and does not interfere with battery charging
when the MX3X is in a cradle.
Tool Required: #1 Phillips Screwdriver
Installation
1. Place the MX3X, with the screen facing down, on a flat stable surface.
2. Attach the handstrap to the MX3X with the screws and washers provided.
3. Test the strap's connection making sure the MX3X is securely connected to each end of the
strap connectors.

Attach the Stylus Clip (Optional)

Carefully remove the paper backing from the Stylus Clip sticky. Firmly press the sticky side of the
clip onto the MX3X and hold in place for 15 seconds. Thread the tether through the end of the
stylus and tie the ends firmly to the Stylus Clip so that the ends don't interfere with placing the
stylus in the Stylus Clip or placing the MX3X in a cradle. Place the stylus in the Stylus Clip when
not in use.
E-EQ-MX3XRG-A

Figure 1-6 MX3X With Handstrap Installed

7
MX3X Reference Guide