Configuring The Mx3Plus With Lxeconnect; Install Lxeconnect; Figure 1-19 Activesync Explore - LXE MX3Plus Reference Manual

28

Configuring the MX3Plus with LXEConnect

Requirements: ActiveSync version 3.8 (or higher) must be resident on the host (desktop/laptop)
ActiveSync is already installed on the MX3Plus. The MX3Plus is preconfigured to establish a
USB ActiveSync connection to a PC when the proper cable is attached to the MX3Plus and the
PC. If The MX3Plus uses a serial port for ActiveSync, it is necessary to configure the MX3Plus
to use the serial port. Complete details on the proper cables and port configuration are included in
the ActiveSync section later in this chapter.
LXEConnect allows a user to view the MX3Plus screen remotely from a PC using an ActiveSync
connection.

Install LXEConnect

1. Install Microsoft ActiveSync version 3.8 or higher on a PC with a USB port. For details,
please see ActiveSync later in this chapter.
2. Power up the MX3Plus.
3. Connect the MX3Plus to the PC using the proper connection cable. Once connected, the
ActiveSync dialog box appears. If using the USB connection, the ActiveSync connection is
automatically established.
connection from the MX3Plus.
4. Select "No" for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a
partnership is not set up. It is not necessary to establish a partnership to use LXEConnect.
However, if a partnership is desired for other reasons, one may be established now. More
details on partnerships are included in ActiveSync later in this chapter.
5. When the ActiveSync screen appears, select Explore.
6. An explorer window is displayed for the MX3Plus. Browse to the \System\LXEConnect
folder.
MX3Plus Reference Guide
computer. Please see the following section ActiveSync for more details on
ActiveSync.
If using a serial connection, it is necessary to initiate the

Figure 1-19 ActiveSync Explore

Configuring the MX3Plus with LXEConnect
E-EQ-MX3PLUSRG-B