Configuring The Mx7 Tecton With Lxeconnect; Install Lxeconnect; Using Lxeconnect - LXE MX7 Tecton Reference Manual

Configuring the MX7 Tecton with LXEConnect

Configuring the MX7 Tecton with LXEConnect
LXEConnect allows a user to view the MX7 Tecton screen remotely from a PC using an ActiveSync connection:
Requirements: ActiveSync (version 4.5 or higher for Windows XP desktop/laptop computers) must be resident on the host
(desktop/laptop) computer. Windows Mobile Device Center (version 6.1 or higher) is required for a Windows Vista/Windows 7
desktop/laptop computer.
ActiveSync is already installed on the MX7 Tecton. The MX7 Tecton is preconfigured to establish a USB ActiveSync
connection to a host PC when the USB cable is attached to the MX7 Tecton and the host PC.

Install LXEConnect

1. Contact your LXE representative
2. Download the files to a location on your host PC hard drive.
3. Execute the setup.exe file that was copied to the host PC. This setup program installs the LXEConnect utility.
4. Follow the on screen installation prompts. The default installation directory is C:\Program Files\LXE\LXEConnect.
5. When the installation is complete, create a desktop shortcut to the following file: C:\Program Files\LXE\L-
XEConnect\LXEConnect.exe. If a different directory was selected during installation, please substitute the appropriate
directory.
6. LXEConnect is now installed on the host PC and ready to use.

Using LXEConnect

1. Power up the MX7 Tecton.
2. Connect the MX7 Tecton to the host PC using the USB connection cable. Once connected, the ActiveSync dialog box
appears and the ActiveSync connection is automatically established.
3. Select "No" for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a partnership is not set up. It
is not necessary to establish a partnership to use LXEConnect. However, if a partnership is desired for other reasons,
one may be established now.
E-EQ-MX7WMRG-A [ 199 ] MX7 Tecton™ for Windows Mobile Reference Guide
for the LXEConnect files.
LXEConnect Setup