Programmable Scan Buttons; Field Exit Key Function (Ibm 5250/Tn5250 Only); Scan Buttons And The Scnr Led - LXE MX3X Reference Manual

Programmable Scan Buttons

Programmable Scan Buttons
There are two buttons, one on each side of the display. The buttons can be programmed to perform specific functions.
The programmable keys have no effect on barcode scanners tethered to the device.
When there is no integrated scanner installed, both buttons default to Enter buttons (with the exception of IBM 5250 terminal
emulation devices – in this case, the left button is labeled and functions as Field Exit).
Note: The programmable Scan key is the Field Exit key when the MX3X is an IBM 5250 / TN5250 compatible device.
To edit the button parameters, select Start | Settings | Control Panel | KeyPad. Change the parameter values and tap OK to
save the changes.

Field Exit Key Function (IBM 5250/TN5250 Only)

The Field Exit key is used to exit an input field. If the field is an Auto Enter field, the auto transmit function is activated. This
key function is present on the IBM 5250/TN5250 specific keypad only.

Scan Buttons and the SCNR LED

The SCNR LED, located above the keypad, illuminates during an integrated barcode scanner function. It is affected by internal
scanner algorithms.
Red – scanning.
l
Green – good scan.
l
Unlit – laser scanner is inactive.
l
The Scan buttons have no effect on tethered barcode scanners connected to a serial port. Tethered scanners read barcode
scans only when the trigger on the tethered scanner is pressed. Pressing the trigger on the tethered scanner has no effect on
the mobile device's Scan buttons.
E-EQ-MX3XRG-W-ARC [ 14 ] MX3X Reference Guide