Configuring The Mx3Plus With Lxeconnect; Install Lxeconnect - LXE MX3Plus Reference Manual

Configuring the MX3Plus with LXEConnect

Configuring the MX3Plus with LXEConnect
LXEConnect allows a user to view the MX3Plusscreen remotely from a PC using an ActiveSync connection:
Requirements: ActiveSync version 3.8 (or higher) must be resident on the host (desktop/laptop) computer. Please see the
following section ActiveSync for more details on ActiveSync.
ActiveSync is already installed on the MX3Plus. The MX3Plus is preconfigured to establish a USB ActiveSync connection to
a PC when the proper cable is attached to the MX3Plus and the PC. If The MX3Plus uses a serial port for ActiveSync, it is
necessary to configure the MX3Plus to use the serial port. Complete details on the proper cables and port configuration are
included in the ActiveSync section.

Install LXEConnect

1. Install Microsoft ActiveSync version 3.8 or higher on a PC with a USB port. For details, please see ActiveSync.
2. Power up the MX3Plus.
3. Connect the MX3Plus to the PC using the proper connection cable. Once connected, the ActiveSync dialog box
appears. If using the USB connection, the ActiveSync connection is automatically established. If using a serial con-
nection, it is necessary to initiate the connection from the MX3Plus.
4. Select "No" for partnership when prompted. Dismiss any ActiveSync dialog boxes warning a partnership is not set up.
It is not necessary to establish a partnership to use LXEConnect. However, if a partnership is desired for other reasons,
one may be established now. More details on partnerships are included in ActiveSync later in this chapter.
5. When the ActiveSync screen appears, select Explore.
6. An explorer window is displayed for the MX3Plus. Browse to the \System\LXEConnect folder. Contact your
resentative for the necessary files if this folder is missing.
ActiveSync Explore
E-EQ-MX3PLUSRG-J [ 52 ] MX3Plus Reference Guide
LXE rep-