Preparation; Programmable Function Keys - Icom IC-F5060 Series Operating Manual

1

PREPARATION

■ Programmable function keys

The following functions can be assigned to the [UP], [DOWN],
[P0], [P1], [P2], [P3] and [P4] programmable function keys.
Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function.
D For BIIS 1200 operation only
BIIS BUTTON KEY
➥ Push to toggle the call ID list, transmit message and stand-
by modes.
➥ Push to toggle between the queue channel and the received
message record display, after the queue channel is select-
ed.
➥ Hold down for 1 second to select the queue channel
mode.
STATUS UP/DOWN KEYS
➥ While in standby, push to display the transmit status screen
and select a status number.
➥ When a received SDM (Short Data Message) is displayed,
push to cancel the automatic scroll and then manually
scroll the message.
➥ When an SDM that contains more than 12 characters is
displayed, push to manually scroll the message.
1
D For MDC 1200 system operation only
MDC CALL KEY
➥ Push to enter the MDC menu selection mode.
➥ Push [CH Up] or [CH Down] to select the desired
"SELCALL," "CALALERT," "STUN," "REVIVE,"
"RADIOCHK," "STATUS", "MSG" and "CALL LOG" MDC
menu.
After selecting, push this key again to enter the transceiver
alias selection mode.
• If no operation is performed for approximately 15 seconds, the
transceiver returns to the normal operating mode.
➥ In the transceiver alias selection mode, push to return to the
MDC menu selection mode.
MDC SELCALL KEY
Push to enter the transceiver alias selection mode for a
SelCall.
• After selecting the desired alias, push [PTT] to transmit a SelCall.
• If no operation is performed for approximately 15 seconds, the trans-
ceiver returns to the normal operating mode.
MDC CALLALERT KEY
Push to enter the transceiver alias selection mode for a
CallAlert.
• After the desired alias selection, push [PTT] to transmit a Call
Alert.
• If no operation is performed for approximately 15 seconds, the trans-
ceiver returns to the normal operating mode.