Icom IC-F5060 Series Operating Manual page 23

D Transmitting a Stun Call
Stun call allows you to send MDC 1200 system signal that
will stun the targeted station.
q Push [MDC Call] to enter the MDC menu selection mode.
w Push [CH Up] or [CH Down] to select "STUN".
S T U N
e Push [MDC Call] again to enter the transceiver alias se-
lection mode.
r Push [CH Up] or [CH Down] to select the desired alias.
t Push [PTT] to transmit the stun call to the selected sta-
tion.
• "STN TX" is displayed.
y Release [PTT].
• "STN ACK" is displayed if an acknowledgement is received from
the targeted station.
• "STN FAIL" is displayed if the targeted station does not send
back an acknowledgement.
u After a specified time period has passed, the transceiver
will return to receive.
MDC 1200 SYSTEM OPERATION
D Transmitting a Revive Call
Revive call allows you to send MDC 1200 system signals that
will revive a stunned transceiver.
q Push [MDC Call] to enter the MDC menu selection mode.
w Push [CH Up] or [CH Down] to select "REVIVE".
R E V I V E
e Push [MDC Call] again to enter the transceiver alias se-
lection mode.
r Push [CH Up] or [CH Down] to select the desired alias.
t Push [PTT] to transmit the revive call to the selected sta-
tion.
• "REV TX" is displayed.
y Release [PTT].
• "REV ACK" is displayed if an aknowledgement is received from
the stunned station.
• "REV FAIL" is displayed if no acknowledgement is received from
the stunned station.
u After a specified time period has passed, the transceiver
will return to receive.
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
20