Icom IC-F5060 Series Operating Manual page 5

D For LTR operation only
PHONE KEY
Push to connect or disconnect the telephone network.
D For IDAS operation only
DIGITAL BUTTON KEY
➥ Push to enter the application selection mode.
➥ Hold down for 1 second to toggle the call type between
Individual and Talkgroup, and then automatically enter the
application selection mode.
• Push [CH Up] or [CH Down] to select the desired "VOICE,"
"CALALERT," "STUN," "KILL," "REVIVE," "REM MON,"
"RADIOCHK," "STATUS," "MSG," "STAT POL" and "CALL LOG"
application.
➥ While in the application selection mode, push to enter the
Individual or Talkgroup ID selection mode.
• If "STATUS" or "MSG" is selected as the application, the message
selection mode appears. Push [CH Up] or [CH Down] to select
the desired message, then push the Digital Button key again to
enter the Individual or Talkgroup ID selection mode. (pp. 39, 40)
➥ In the application selection mode, hold down for 1 second
to return to the normal operating mode.
STATUS UP/DOWN KEYS
➥ When a received SDM is displayed, push to cancel the
automatic scroll and manually scroll the message.
➥ When an SDM that contains more than 12 characters is
displayed, push to manually scroll the message.
10-KEY ENTER KEY
Push to enable the microphone's 10-key pad operation to se-
lect the memory channel, status message number, and so on,
depending on the presetting. Ask your dealer for details.
1
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
2