Ltr Operation; Receiving A Call - Icom IC-F5060 Series Operating Manual

■ LTR operation

Push [Zone], then push [CH Up] or [CH Down]* to select
the LTR zone.
* The way of selecting the desired zone may differ, depending on
your system set up.
NOTE: In the LTR mode, BIIS 1200 and IDAS modes are
disabled.

■ Receiving a call

D Group call
q When a call is received:
• LED lights green.
w Hold down [PTT], then speak into the microphone at a
normal voice level.
e Release [PTT] to return to receive.
D Selective call (DTMF call)
q Push [Call] to mute the channel.
w When receiving a call, the calling station name appears
and a beep sounds. Then the mute is released.
• " " appears.
Appears
0 0 2 c h - 0 3
f H 1 7 3 . 7 M
LTR OPERATION
D Phone call
q Push [CH Up] or [CH Down] to select the phone chan-
nel.
• " " appears.
w When a phone call is received (transceiver rings), push
[Phone] (or push [PTT]).
• " " blinks.
0 0 2 c h - 0 3
f H
e Hold down [PTT], then speak at a normal voice level. Re-
lease [PTT] to return to receive.
r After conversation is finished, push [Phone] to disconnect
the phone call.
• " " stops blinking.
4
Blinks
1 7 3 . 7 M
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
24