Icom IC-F5060 Series Operating Manual page 12

2
BIIS 1200 OPERATION
D Selecting a received message
The transceiver memorizes the received message in the
memory. Up to 6 messages for status and SDM, or 95 charac-
ter SDM's can be memorized. The oldest message is erased
when the 7th message is received. However, once the trans-
ceiver is powered OFF, all messages are cleared.
q Hold down [BIIS Button] for 1 second.
• The queue memory is displayed.
w Push [BIIS Button] again for 1 second.
• The message memory is displayed.
When a message is selectable
M E S S A G E
-
When no message is stored
M E S S A G E
- N O
9
M S G ! -
M S G -
e Push [CH Up] or [CH Down] to select a desired mes-
sage.
• When selecting a SDM that includes more than 12 characters,
the message automatically scrolls when the automatic scroll
function is activated.
• Push [Status Up]/[Status Down] to manually scroll the mes-
sage.
r Push and hold [BIIS Button] for 1 second again to return
to the standby mode.
• If no operation is performed for 30 seconds, the transceiver au-
tomatically returns to the standby mode.