Icom IC-F5060 Series Operating Manual page 36

5
IDAS OPERATION
D Transmitting a Call Alert
Call Alert allows you to inform another user who may be away
from the transceiver that you want to talk.
q Push [Digital Button] to enter the application selection
mode.
• "VOICE" appears.
• To change the call type, hold down [Digital Button] for 1 second in
the standby mode. After changing, the transceiver automatically
enters the application selection mode.
w Push [CH Up] or [CH Down] to select "CALALERT."
e Push [Digital Button] again to enter the Individual or Talk-
group ID selection mode.
• A preprogrammed ID name is displayed.
• When an ID name is not programmed, the ID code is displayed.
• The primarily ID can be preset to display first.
This function is usable in transceivers whose revision number is
2.9 or later. Ask your dealer for details.
r Push [CH Up] or [CH Down] to select the desired ID name
or ID code.
• Depending on the presetting, you may be able to directly input
the ID. (The optional HM-152T is required.) See page 43 for de-
tails.
C A L A L E R T
S T A T I O N
The individual or Talkgroup ID name is displayed.
33
1
t Hold down [PTT] to transmit the Call Alert to the selected
station or talkgroup.
• "CA CALL" is displayed.
y Release [PTT].
• "CA OK" is displayed if an acknowledgement is received from
the targeted station.
• "CA FAIL" is displayed if no acknowledgement is received from
the targeted station.
u After a specified time period has passed, your transceiver
will return to the standby mode.