Side Control Panel - JVC CONNECTED CAM GY-HC500U Instructions Manual

Side Control Panel

b Z
a
A
B
C
D
E
F
G H
.
A [FOCUS AUTO/MANU] Focus Switch
(A P60 [Focus Operation] )
B [ND FILTER] ND Filter Switch
Use the ND filter to keep the lens aperture in the
appropriate range.
OFF, 1/4, 1/16, 1/64
(A P68 [Setting the ND Filter] )
C [PUSH AUTO/PUSH LOCK] Focus Push Auto/
Push Lock Button
(A P60 [One Push Auto Focus] )
(A P60 [Setting to Auto Focus Temporarily
(Push Auto Focus)] )
(A P60 [Locking the Focus] )
D [USER7] Button
It can be assigned with a specific menu function.
(A P46 [Assignment of Functions to User
Buttons] )
E [USER8] Button
It can be assigned with a specific menu function.
(A P46 [Assignment of Functions to User
Buttons] )
F [IRIS] Iris Auto/Manual Selection Button
(A P65 [Adjusting the Iris] )
G [PUSH AUTO] Iris Push Auto Button
(A P65 [Adjusting the Iris] )
H [GAIN] Gain Auto/Manual Selection Button / [L/
M/H] Sensitivity Selection Switch
(A P66 [Setting the Gain] )
28
Names of Parts
X V
W
Y U
I J K
L M
I [WHT BAL] White Balance Auto/Manual
Selection Button / [B/A/PRESET] Selection
Switch
(A P69 [Adjusting the White Balance] )
J [y] One Push Auto White Balance Button
K [SHUTTER] Shutter Speed Auto/Manual
T
Selection Button
S
(A P67 [Setting the Electronic Shutter] )
R
L [FULL AUTO ON/OFF] Full Auto Switch
Q
(A P64 [Adjusting the Brightness] )
P
(A P69 [Automatic White Balance Mode
(FAW: Fulltime Auto White balance)] )
O
N
M [MARKER/6] Marker/User 6 Button
This button toggles ON/OFF the marker, safety
zone, and center mark displays.
You can also use it as a user button by assigning
a specific feature in the menu setting to this
button.
(A P46 [Assignment of Functions to User
Buttons] )
N [KEYLOCK ON/OFF] Key Lock Switch
(A P54 [About the Operation Lock Feature
(KEYLOCK)] )
O [MODE] Camera/Media Mode Selection Button
(A P24 [Operation Modes] )
P EXT.SLOT Lamp
Lights up in green when a media is inserted into
EXT.SLOT, and lights up in red when the media
is being accessed.
Q [POWER ON/OFF] Lock Power ON/OFF Switch
Turns ON/OFF the power.
Hold down the lock button (blue) in the center
0
to toggle ON/OFF.
When the power is turning OFF, "P.OFF"
0
appears on the LCD monitor and viewfinder.
Wait for 5 seconds or more to turn on the
0
power again.
(A P38 [Turning On/Off the Power] )
R POWER/CHARGE LED
(A P35 [Using a Battery Pack] )
S STATUS LED
(A P155 [ STATUS LED ] )
T NETWORK LED
(A P155 [ NETWORK LED ] )