Loading A Setup File - JVC GY-HM600E Instructions Manual

6 Select [Store] and press the Set button (R).
7 Save the file.
A confirmation screen appears when you
0
choose to overwrite.
Select [Overwrite] on the confirmation
screen, and press the Set button (R). Saving
starts, and "Storing..." appears on the
screen.
Saving starts, and "Storing..." appears on the
0
screen when the file is newly saved.
8 Saving is complete.
After saving of the file is complete, "Complete"
appears on the screen, and the menu screen
closes automatically.

Loading a Setup File

1 Display the [Setup File] menu.
Select [Main Menu] B [System] B [Setup File]
and press the Set button (R).
(A P108 [ Setup File ] )
2 Select [Load File] and press the Set button
5
(R).
3 Select [Scene File] or [Picture File], and
press the Set button (R).
6
The existing files are displayed.
4 Select the file to load using the cross-
shaped button (JK), and press the Set
button (R).
7
Memo :
When the write-protect switch of the inserted SD
0
card is set, a z mark appears beside the SD
card icon. Setup files can be loaded from an SD
card even if the write-protect switch is set.
Setup files that are completely incompatible will
0
not be displayed.
(A P126 [Configuring Setup Files] )
5 Select [Load] on the confirmation screen,
and press the Set button (R).
Loading starts, and "Loading..." appears on the
screen.
6 Reading is complete.
After reading of the file is complete, "Complete"
appears on the screen, and the menu screen
closes automatically.
4
5
127