HP 10:10 LAN Bridge MB Installation And Reference Manual page 18

For Wall Mounting: Using a Phillips or cross-head screwdriver, attach the mounting
brackets to the bridge with 10-mm M4 screws (included in the accessories kit). Then attach the
⁄ ⁄
1 5
bridge to a wood surface (minimum -in. plywood or equivalent) with -inch number 12
2 8
wood screws or equivalent (not included).
Mounting bracket
10-mm M4 screws
Flat on wall
Mounting bracket
Straight out from wall
10-mm M4 screws
For Table Mounting: Attach the self-adhesive rubber feet to the bottom of the bridge. Set
the bridge on a table near a power source.
2-4 Installation