No Power; Cannot Print - Sharp DX-B350P User Manual

No Power

Troubleshooting
Status
Text is blurred.
No Power
Status
There is no power.
Power is interrupted
frequently.

Cannot Print

Status
Print instruction was sent but
processing did not start.
9-6
Downloaded From ManualsPrinter.com Manuals
Items to check
Is the paper damp?
Is the correct type of paper used?
Items to check
Is the power switched off?
Is the power cord disconnected or not securely
connected?
Is the power cord connected to a power outlet
with the correct voltage?
Printer may have malfunctioned.
Is the power cord disconnected or not securely
connected?
Items to check
Is the fault indicator lit?
Is the print-ready indicator off?
Is there any message displayed on the
Operator panel?
Is there any message displayed in the
computer?
Action
Replace with paper from a new ream.
Load the correct type of paper.
Action
Press the printer switch to the <I> position to turn
the power on.
Switch off the power and connect the cord to the
power outlet and printer again. Then, switch on
the power.
Connect the printer exclusively to an outlet with a
suitable voltage rating and current rating.
Switch off the power to the printer, remove the
plug from the power outlet and contact Technical
Support.
Switch off the power and connect the cord to the
power outlet and printer again. Then, switch on
the power.
Action
Carry out the action according to the
status of the indicator.
Check the message, then carry out the
action.
Check the message, then carry out the
action.
User's Guide