Windows Operations; Installing Pcl5E And Postscript 3 Drivers - Sharp DX-B350P User Manual

Chapter 4: Windows Operations

Installing PCL5e and PostScript 3 Drivers

Downloaded From ManualsPrinter.com Manuals
This chapter describes features of the Windows Driver. The
driver allows you set default settings for all print jobs as
well as print settings for individual print jobs. Similar
features may be available in the Operator Panel or EWS. If
there is a conflict between settings in the Operator Panel,
Printing Preferences (default driver settings), or Embedded
Web Server and printer settings set via your application for
individual print jobs, the application settings supersede any
other setting.
The Sharp Installation CD installs the PCL6 printer driver
which is the best driver choice for most users. PCL5e and
PostScript 3 are also provided on the installation CD and
can be installed as follows:
1. Place the Sharp Installation CD into your CD drive.
2. From the Control Panel, select Printers and Faxes.
3. Right-click in the printer list and select Add Printer.
The Add Printer Wizard appears.
4. Click Next.
The Local or Network Printer screen appears.
5. Select Local printer attached to this computer and
deselect Automatically detect and install my Plug
and Play printer.
6. Click Next.
The Select a Printer Port screen appears.
7. Select Use the following port and select the port
from the pulldown list.
8. Click Next.
The Install Printer Software screen appears.
9. Select Have Disk...
An Install From Disk dialog appears.
In this Chapter...
• Installing PCL5e
and PostScript 3
Drivers
• Setting Default
Values
• Printing a Test
Page
• Cancelling Printing
• Accessing the
Driver from an
Application
• Navigating the
Printer Properties
Window
• Saved Settings
• Main Tab
• Paper Tab
• Advanced Tab
• Job Handling Tab
• Watermark Tab
4-1