Sharp DX-B350P User Manual page 38

Hide thumbs Also See for DX-B350P:
Table of Contents

Advertisement

Operator Panel Menus
Operator Panel
Menu Item
USB Setup
3-12
Downloaded From ManualsPrinter.com Manuals
Value
Binary PS
On/Off
Factory Defaults
Yes
No
Connection Speed
Auto-Sense
100Mbit Half
100Mbit Full
10Mbit Half
10Mbit Full
Bidirectional
On/Off
Wait timeout
0000-9999
SNMP On/Off
On/Off
HTTP Port
00000-99999
IP Filtering
Disabled
Enabled
Interpreter
Auto Switch
PCL
PostScript 3
Default
Description
On
When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
No
Resets the menu to factory network defaults.
Auto-Sense
Configures the Ethernet connection speed
(10 or 100 Mbits/second) and
communication mode (full or half duplex).
The "Auto Sense" setting attempts to
auto-negotiate this connection with the
networking hardware, usually a switch.
When a setting other than "Auto Sense"
must be used, the following should be
considered: If connected to network switch,
the "100Mbit/Full" setting can be used. If
connected to a hub, use the "100Mbit/Half"
setting.
On
When this setting is "on", the printer may
receive and send information over the
network interface. When this setting is "off",
the printer will only receive information
over the network interface. This applies
primarily when using printing over a "Port
9100" connection. This setting normally
should be left at its default setting, should
only be turned "off" under special
circumstances
0270
(In Seconds): Specifies the amount of time
the printer will allow a network connection
to remain open without transferring data
before the printer terminates the connection.
On
00080
Specifies the TCP port number to use for
HTTP connection to the printers embedded
web server.
Disabled
(available via web server only): Allows an
administrator to control access to printing
and access to the embedded web server on
the basis of IP addresses. This is a security
feature.
This item allows you to set up the USB
interface.
Auto Switch
.
User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx-b450p

Table of Contents