Ps Menu; Pcl Menu - Sharp DX-B350P User Manual

PS Menu

The PS menu allows you to Print PS Errors. Items available in this menu are described below

PCL Menu

The PCL menu allows to set a variety of PCL settings. Items available in this menu are
described below
User's Guide
Downloaded From ManualsPrinter.com Manuals
Menu Item Value
Format Raw
Normal
Binary
Delay Out Close On/Off
Binary PS On/Off
Parameter Value
Print PS Errors On/Off
Parameter Value
Orientation Portrait
Landscape
Font Source Internal
User FLASH
Hard Disk
Compact Flash
Font Number 0-158
Default Description
Raw Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = "Adobe Standard Protocol" (ASP)
Binary = "Binary Control Protocol" (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
Off When ON, the printer will wait until the job
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
On When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
Default Description
Off Choose to either print or not print PS errors.
Default Description
Portrait Choose the orientation of the page.
Internal Choose the source of the default font.
50 Set the default font number.
Operator Panel Menus
Operator Panel
3-13