Ipv6 Implementation; Specifications; Operational Information; Snmp - Sharp DX-B350P User Manual

Hide thumbs Also See for DX-B350P:
Table of Contents

Advertisement

IPv6 Implementation

Specifications

The IPv6 implementation conforms to the following IETF documents:

Operational Information

IPv6 enabled devices can auto configure their IPv6 address. This happens automatically
whenever there is an IPv6 enabled router on the subnet to which the device is connected. The
printer unique ID is obtained from the Ethernet MAC address. The router may advertise
multiple network prefixes, depending on the network configuration. The Network summary
page displays all the above addresses, if they exist. If only the Local Link address (starting with
"xFE80...") is displayed, that is an indication that the link is not connected to a router
(gateway). No manual configuration of IPv6 addresses is supported, nor is there support for
DHCPv6, and the printer does not register its IPv6 address with DNS.
Upper Level Protocols such as UDP, TCP run with either IPv4 or IPv6. For instance, a print job
can be sent to the printer over IPv4 or IPv6. Similarly the EWS or SNMP can be accessed over
IPv4 or IPv6. IPv6 and IPv4 coexist independent of each other. They can be Enabled/Disabled
in any combination. They are both enabled by default. In cases where a particular network is
configured to run only one IP version, it makes sense to disable the other one (for better
resource utilization).

SNMP

SNMP can be used to manage any network device. SNMP is a protocol that allows an SNMP
manager (the controller) to control an SNMP agent (the controlee) by exchanging SNMP
messages. The main purpose of an SNMP message is to control (set) or monitor (get) the
parameters in a network device.
In SNMP, a parameter is an instance of a more generic object. For example, an SNMP agent
may have several instances of an object. An SNMP manager can set or get the value for each
object instance (each parameter).
User's Guide
Downloaded From ManualsPrinter.com Manuals
RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
RFC 2461: Neighbor Discovery for IP Version 6 (IPv6)
RFC 2462/4862: IPv6 Stateless Address Auto Configuration
RFC 1981: Path MTU Discovery for IP Version 6
RFC 2463/4443: Internet Control Message Protocol (ICMPv6)
RFC 2710/3810: Multicast Listener
Discovery Version 2 (MLDv2)
IPv6 Implementation
Networking
7-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx-b450p

Table of Contents