Sharp DX-B350P User Manual page 35

User's Guide
Downloaded From ManualsPrinter.com Manuals
Menu Item Value
Delay Out Close On/Off
Binary PS On/Off
Serial Setup
Interpreter Auto Switch
PCL
PostScript 3
Format Raw
Normal
Binary
Serial Mode RS232
RS422
Baud Rate 1200, 2400,
4800, 9600,
19200, 38400,
57600, 115200
Data Bits 8, 7
Stop Bits 1, 2
Parity None
Even
Odd
DTR Ready/Busy On/Off
DTR On1/Off1 On/Off
DTR Error On/Off
RTS Ready/Busy On/Off
Default Description
Off When ON, the printer will wait until the job
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
On When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
Submenu
Auto Switch
Raw Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = "Adobe Standard Protocol" (ASP)
Binary = "Binary Control Protocol" (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
RS232 Serial mode
9600 Serial baud rate
8 Serial data bits
1 Serial stop bits
None Serial parity
Off If On, the DTR signal will reflect the Ready/
Busy status.
Off If On, the DTR signal will reflect the Online/
Offline status.
Off If On, the DTR signal will reflect the Error
status.
Off If On, the RTS signal will reflect the Ready/
Busy status.
Operator Panel Menus
Operator Panel
3-9