Sharp DX-B350P User Manual page 36

Operator Panel Menus
Operator Panel
Menu Item
Network 1 Setup
3-10
Downloaded From ManualsPrinter.com Manuals
Value
RTS On1/Off1 On/Off
RTS Error On/Off
XON Ready/Busy On/Off
XON On1/Off1 On/Off
XON Error On/Off
DTR Polarity High
Low
RTS Polarity High
Low
Robust XON On/Off
Delay Out Close On/Off
Binary PS On/Off
ETX/ACK On/Off
Interpreter Auto Switch
PCL
PostScript 3
Format Raw
Normal
Binary
Default Description
Off If On, the RTS signal will reflect the Online/
Offline status.
Off If On, the RTS signal will reflect the Error
status.
On If On, the XON response will reflect the
Ready/Busy status.
On If On, the XON response will reflect the
Online/Offline status.
Off If On, the XON response will reflect the
Error status.
High Polarity for DTR
High Polarity for RTS
Off Send Multiple XON codes.
Off When ON, the printer will wait until the job
is completely printed and delivered to the
output tray before terminating the
connection, allowing all reverse-channel
data to be sent back to the host. This will
cause a reduction in printer throughput.
When OFF, reverse-channel data generated
after the job interpretation is discarded. No
reduction in printer throughput occurs.
On When On, the feature allows all binary codes
to be processed by the PostScript interpreter.
When Off, special binary control codes may
be intercepted per the Format item setting.
Off
This submenu allows you to set up the
Network interface.
Auto Switch
Raw Configures how incoming print jobs are
scanned for special binary control codes.
RAW=no processing
Normal = "Adobe Standard Protocol" (ASP)
Binary = "Binary Control Protocol" (BCP)
When Interpreter setting is Auto Switch and
this setting is Raw, the printer will
automatically determine the control code
method, defaulting to Normal if no codes are
found.
User's Guide