Custom Sizes; Paper Types - Sharp DX-B350P User Manual

Paper Usage
Getting to Know Your Printer

Custom Sizes

In addition to the standard sizes of paper you can use, you can also print on custom size paper
from any tray. The custom size paper must meet the following guidelines.
•
•
•
Insert paper in the tray so the side to be printed is facing up and the short edge of the paper goes
into the printer first. On the Operator Panel, use the Paper>Media Size/Type Menu to set
Auto-Sense OFF and then set Custom Size for the intended tray. Then use your application
software printer driver to send data to be printed on the installed custom size paper. See section
"Custom Size Paper" on page 4-14.When using the EWS, turn Auto-Sense OFF and press
Submit to gain access to Custom Size settings.

Paper Types

The printer supports the following paper types
Paper Types
Plain (64-105 gsm DX-B350P)
(68-105 gsm DX-B450P)
Transparency
Pre-Punched
Letter Head
Color
Pre-Printed
Bond
Labels
Cardstock
Postcard
Envelope
Thick 1 (106-159 gsm)
Thick 2 (160-216 gsm)
2-6
Downloaded From ManualsPrinter.com Manuals
All Custom sizes must be fed short edge first.
Paper smaller than 3 in by 5 in (76.2 mm by 127.0 mm) or larger than 8.5 in by 14 in
(215.9 mm by 355.6 mm) cannot be printed.
Paper smaller than 3.5 in by 5.5 in (88.9 mm by 139.7 mm) must be printed from Tray 1
and cannot be duplexed or output to the Offset Catch Tray.
Fuser Mode
Normal
Transparency
Normal
Normal
Normal
Normal
Thick1
Thick1
Thick2
Thick1
Thick1 for DX-B350P
Thick3 for DX-B450P
Thick1
Thick2
Restrictions
None
No duplex
Half speed on DX-B450P
None
None
None
None
None
No duplex
No duplex
None
No duplex
Half speed on DX-B450P
None
None
User's Guide