Changing Bulbs - Mercedes-Benz Sprinter Operating Instructions Manual

Example (halogen headlamps)
Low-beam headlamp bulb holder
;
Bulb holder for high-beam headlamp
=
Bulb holder for parking lamp/standing
?
lamp (halogen headlamps)
Turn the corresponding bulb holder with
X
bulb ;, = or ? counter-clockwise and
pull it out of the lamp.
Pull the bulb out of the bulb holder.
X
Insert the new bulb in such a way that its
X
base fits into the recess of the bulb holder.
Insert the bulb holder with the bulb into the
X
lamp and turn it clockwise to tighten.
The bulb holder engages audibly.
Place housing cover : into the opening
X
and turn in the opposite direction of the
arrow.
Close the hood.
X
Cornering light function/daytime run-
ning lamps

Changing bulbs

Switch off the lighting system.
X
Open the hood ( page 248).
X
Y
Turn housing cover : counter-clockwise
X
and remove.
Bi-Xenon headlamps: turn bulb holder
X
with bulb ; counter-clockwise and
remove it.
Halogen headlamps: press the spring
catches of the bulb holder together and
remove the bulb holder with bulb ;.
Pull the bulb out of the bulb holder.
X
Press a new bulb into the bulb holder.
X
Bi-Xenon headlamps: insert the bulb
X
holder with bulb ; into the lamp and turn
clockwise.
Halogen headlamps: insert the bulb
holder with bulb ; into the lamp.
The bulb holder with bulb ; engages audi-
bly.
Replace cap : and turn it clockwise to the
X
stop.
The cap audibly engages.
Close the hood ( page 249).
X
Y
101
Z