Mercedes-Benz Sprinter Operating Instructions Manual page 105

Tail lamps
Switch off the lighting system.
X
Open the rear door.
X
Undo screws : and unclip the lamp lens in
X
the direction of the arrow.
Pull the connector off the bulb holder.
X
Retaining lugs
;
Brake lamps
=
Turn signal lamps
?
Standing lamp/tail lamp
A
Backup lamps
B
Rear fog lamp
C
Changing bulbs
Release retaining lugs ; and take the bulb
X
holder out of the tail lamp.
Applying light pressure to the bulb, turn it
X
counter-clockwise and remove it from the
bulb holder.
Press the new bulb into the bulb holder and
X
screw it in clockwise.
Press the connector into the bulb holder.
X
Insert the lamp lens.
X
To do this, clip the bulb holder into the three
holes provided at the side and tighten
screws :.
License plate lamp
Switch off the lighting system.
X
Insert a screwdriver or similar implement
X
into recess ; and carefully pry off lamp
lens :.
Pull the bulb out of the bulb holder.
X
Insert a new bulb.
X
Align lamp lens : and clip it in so that it
X
engages.
103
Z