Mercedes-Benz Sprinter Operating Instructions Manual page 190

On-board computer (vehicles with steering wheel buttons)
188
Using the steering wheel buttons
Switch on the audio equipment (see the
X
separate operating instructions).
Press the V or U button repeatedly
X
until the station selected appears in the
display.
Press the 9 or : button to select the
X
desired station.
You can only store new stations on the
i
audio system itself. See the separate oper-
ating instructions.
You can also operate the audio equipment
in the same way as usual.
Operating the CD player
Current CD (with CD changer)
:
Current track
;
Using the steering wheel buttons
Switch on the audio equipment and select
X
the CD player (see the separate operating
instructions).
Press the V or U button repeatedly
X
until the settings for the current CD appear
in the display.
Press the 9 or : button to select a
X
CD track.
Settings menu
Introduction
In the Settings menu, the following options
and submenus are available:
Resetting all settings
R
Resetting the functions of a submenu
R
Instrument cluster ( page 189)
Y
R
Units and language settings
-
Status bar settings
-
Time( page 191)
Y
R
Lighting ( page 192)
Y
R
Switching surround lighting on/off
-
Switching the daytime running lamps
-
on/off
Setting the exterior lighting delayed
-
switch-off
Activating/deactivating Highbeam
-
Assist
Vehicle
R
Setting the radio station selection
-
Setting the windshield wiper sensitivity
-
Stationary heating or auxiliary heating
R
( page 124)
Y
Convenience ( page 194)
Y
R
Key-dependent settings
-
For safety reasons, it is not possible to
i
reset all of the functions while the vehicle is
in motion. For example, in the
Daytime runn. lamps Daytime runn. lamps
submenu, the
function remains unchanged.
Resetting all settings
Settings menu
Settings Settings
When the message is displayed,
you can reset all functions of the submenu to
the factory settings.
Lighting Lighting