Mercedes-Benz Sprinter Operating Instructions Manual page 127

Setting the switch-on time
Use the same method to select a switch-on
X
time as described in the "Preselecting a
switch-on time" section.
On-board computer without steering
wheel buttons
Press the 9 reset button on the instru-
X
ment cluster.
The hour display flashes.
Use the f and g buttons on the instru-
X
ment cluster to set the hours.
Press the 9 reset button
X
The minute display flashes.
Use the f and g buttons to set the
X
minutes.
The switch-on time is set and selected.
On-board computer with steering wheel
buttons
Press the 9 button on the steering
X
wheel.
The display shows the
Use the W and X buttons on the
X
steering wheel to set the hours.
Press the 9 button.
X
The display shows the
Use the W and X buttons to set the
X
minutes.
Press the V button.
X
The switch-on time is set and selected.
Operation with the remote control
Important information
You can switch the auxiliary heating on/off
and set the operating duration using the
remote control. You can use up to 4 remote
control units on the vehicle. These must be
synchronized for the receiver in your vehicle
( page 126).
Y
Operating the auxiliary heating system
The remote control has a maximum range of
approximately 600 meters. This range is
reduced by:
R
R
R
R
Overview of the remote control
Hours
menu.
:
;
=
Minutes
menu.
Indicator lamp : lights up in various ways to
show different operating modes:
Signaling
Lights up red
Flashes red
Lights up
green
sources of interference
solid objects between the remote control
and the vehicle
the remote control being in an unfavorable
position in relation to the vehicle
transmitting from an enclosed space
Indicator lamp
To confirm settings
To switch the remote control on/off, set
the operating duration or end or cancel
settings
Meaning
Remote control switched
on
Data transfer
Auxiliary heating switched
off
Auxiliary heating switched
on
125
Z