Mercedes-Benz Sprinter Operating Instructions Manual page 197

On-board computer (vehicles with steering wheel buttons)
This function pertains to the
(instrument cluster) menu, the
Vehicle
menu and the menu.
Using the steering wheel buttons
Press the V or U button repeatedly
X
Settings
until the menu appears in the
display.
Press the 9 button to switch to the sub-
X
menu selection.
Press the W or X button to select the
X
Convenience
submenu.
Press the 9 button to select the
X
function.
The selection marker is on the current set-
ting.
Press the W or X button to activate
X
or deactivate key dependency.
Trip computer menu
General notes
You can call up or reset statistical data for the
vehicle in the Trip computer menu.
When you call up the trip computer again,
i
it displays the last function called up.
The units of the statistical information dis-
played are set permanently for each spe-
cific country, and are therefore independ-
ent of the units selected in the
menu.
Trip computer "After start" or "After
reset"
Example: "After start" trip computer
Distance
:
Time
;
Inst. cluster
Average speed
=
Lighting
Average fuel consumption
?
Using the steering wheel buttons
Press the V or U button to select
X
After
or
Press the 9 or : button to select
X
After
The values in the
refer to the start of the journey. The values in
After reset
the
Key
from the last time the trip computer was
reset.
After start
The
automatically reset if:
the ignition has been switched off for more
R
than 4 hours.
999 hours have been exceeded.
R
9,999 miles have been exceeded.
R
After reset
The
cally reset if the value exceeds 9,999 hours or
99,999 miles.
If you turn the key to position 0 in the
i
ignition lock or remove it, all the values are
reset after approximately four hours.
The values will not be reset if you turn the
key back to position 1 or 2 during this time.
Settings
Calling up the range
Using the steering wheel buttons
Press the V or U button to select
X
After
Press the 9 or : button to select
X
Range.
The approximate distance which can be
covered with the tank's current contents
and your current style of driving is shown.
If there is only a small amount of fuel left
i
in the fuel tank, the 7
message is shown instead of the range.
start.
reset.
After start
submenu
submenu are calculated
trip computer function is
trip computer is automati-
start.
Please refuel
195
Z