Side Windows - Mercedes-Benz Sprinter Operating Instructions Manual

Side windows

78
To unlock: press the catch in the direction
X
of arrow =.
The sliding door is unlocked.
Slide the sliding door to the stop in the
X
direction of arrow :.
To close: slide the sliding door in the direc-
X
tion of arrow ; until it engages.
Side windows
Important safety notes
G
WARNING
While opening the side windows, body parts
could become trapped between the side win-
dow and the door frame as the side window
moves. There is a risk of injury.
Make sure that nobody touches the side win-
dow during the opening procedure. If some-
body becomes trapped, release the switch or
pull the switch to close the side window again.
G
WARNING
While closing the side windows, body parts in
the closing area could become trapped. There
is a risk of injury.
When closing make sure that no parts of the
body are in the closing area. If somebody
becomes trapped, release the switch or press
the switch to open the side window again.
G
WARNING
If children operate the side windows they
could become trapped, particularly if they are
left unsupervised. There is a risk of injury.
Activate the override feature for the rear side
windows. When leaving the vehicle, always
take the SmartKey with you and lock the vehi-
cle. Never leave children unsupervised in the
vehicle.
G
WARNING
Do not leave children unsupervised in the
vehicle, even if they are secured in a child
restraint system. Children could otherwise
injure themselves on parts of the vehicle.
They could be severely or even fatally injured
by prolonged exposure to intense heat or
cold.
If children open a door, they could:
injure other people
R
get out of the vehicle and thereby injure
R
themselves or be injured by a passing vehi-
cle
severely injure themselves by falling down,
R
in particular due to the vehicle height
Always take the key with you when leaving the
vehicle, even if you are only leaving for a short
time.
Opening/closing the side window
Control panel (example: driver's door)
Power window, left
:
Power window, right
;
Turn the key to position 2 in the ignition
X
lock.
Press or pull button : or ; until the cor-
X
responding side window has reached the
desired position.
If you press the switch beyond the pressure
point and then release it, the window opens
automatically. To stop the movement, press
or pull the switch again.